多氯联苯(Aroclor 1242)胁迫下鲤鱼肝脏组织氧化应激   总被引：1，自引：0，他引：1  

王仁君  王建国  丁宁  孙萌  高配科 《海洋与湖沼》2018,49(6):1286-1293

本文在实验室条件下通过静态水质染毒方式在生理生化和转录水平上探究了我国重要经济鱼种鲤鱼(Cyprinus carpioio)对多氯联苯Aroclor 1242的氧化应激:鲤鱼肝脏组织抗氧化酶[超氧化物歧化酶(SuperoxideDismutase,SOD)和过氧化氢酶(Catalase,CAT)]活性、脂质过氧化产物丙二醛(Malonydialdehyde,MDA)含量、相关抗氧化酶编码基因(Cu/Zn-SOD、Mn-SOD、CAT)、应激蛋白HSP70、转录因子Nrf2和芳烃受体AhR2基因表达。结果表明:Aroclor 1242胁迫下,鲤鱼肝脏组织抗氧化酶活性表现出低浓度促进高浓度抑制的趋势;肝脏组织丙二醛含量显著升高,其中390μg/L暴露组鲤鱼肝脏组织MDA含量在第6d高于对照组92.1%(P0.01),表明肝脏组织发生脂质过氧化,膜系统受到损伤;鲤鱼肝脏组织中Cu/Zn-SOD、Mn-SOD、CAT、HSP70、Nrf2和AhR2编码基因表达出现不同程度下调。本文从酶学和基因转录水平上揭示了Aroclor1242胁迫下鲤鱼肝脏组织细胞的氧化应激。  相似文献   

基于虚拟现实技术的排水管道损伤粘合修复方法          下载免费PDF全文

于泰然  田爽  张晗 《探矿工程》2020,47(7):106-111

传统的地下排水管道损伤粘合修复方法修复后外渗较多，为了解决这一问题，基于虚拟现实技术提出了一种新的排水管道损伤粘合修复方法，通过负压波形图法定位排水管道的损伤位置和损伤程度，然后通过通信模拟器进行排水管道损伤信号的输送，计算机输出排水管道的损伤鉴定，采用虚拟仿真技术，应对不同损伤程度的排水管道，合理地进行粘合修复处理。结果表明，与传统修复方法相比，基于虚拟现实技术的排水管道损伤粘合修复材料更加合理，在修复后会通过特殊试剂进行清洗，提高了排水管道损伤处的粘合效果，降低排水管道损伤粘合修复后的外渗量。  相似文献   

An approach to model the mechanical behavior of transversely isotropic materials          下载免费PDF全文

M. Mahjoub  A. Rouabhi  M. Tijani  S. Granet 《国际地质力学数值与分析法杂志》2016,40(6):942-961

The present work proposes an approach to adapt existing isotropic models to transversely isotropic materials. The main idea is to introduce equivalence relations between the real material and a fictitious isotropic one on which one can take all the advantages of the well‐established isotropic theory. Two applications of this approach are presented here: a failure criterion and a damage model that takes into account the load‐induced anisotropy. In both cases, theoretical predictions are in agreement with the experimental data. In the present paper, the developed approach is applied to sedimentary rock materials; nevertheless, it can be generalized to any material that exhibits transverse isotropy. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Chemo‐mechanics of cemented granular solids subjected to precipitation and dissolution of mineral species          下载免费PDF全文

Giuseppe Buscarnera  Arghya Das 《国际地质力学数值与分析法杂志》2016,40(9):1295-1320

This paper studies the chemo‐mechanics of cemented granular solids in the context of continuum thermodynamics for fluid‐saturated porous media. For this purpose, an existing constitutive model formulated in the frame of the Breakage Mechanics theory is augmented to cope with reactive processes. Chemical state variables accounting for the reactions between the solid constituents and the solutes in the pore fluid are introduced to enrich the interactions among the microstructural units simulated by the model (i.e., grains and cement bonds). Two different reactive processes are studied (i.e., grain dissolution and cement precipitation), using the chemical variables to describe the progression of the reactions and track changes in the size of grains and bonds. Finally, a homogenization strategy is used to derive the energy potentials of the solid mixture, adopting probability density functions that depend on both mechanical and chemical indices. It is shown that the connection between the statistics of the micro‐scale attributes and the continuum properties of the solid enables the mathematical capture of numerous mechanical effects of lithification and chemical deterioration, such as changes in stiffness, expansion/contraction of the elastic domain, and development of inelastic strains during reaction. In particular, the model offers an interpretation of the plastic strains generated by aggressive environments, which are here interpreted as an outcome of chemically driven debonding and comminution. As a result, the model explains widely observed macroscopic signatures of geomaterial degradation by reconciling the energetics of the deformation/reaction processes with the evolving geometry of the microstructural attributes. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

An original semi‐discrete approach to assess gas conductivity of concrete structures          下载免费PDF全文

M. Ezzedine El Dandachy  M. Briffaut  F. Dufour  S. Dal Pont 《国际地质力学数值与分析法杂志》2017,41(6):940-956

For civil engineering structures with a tightness role, structural permeability is a key issue. In this context, this paper presents a new proposition of a numerical modelling of leakage rate through a cracked concrete structure undergoing mode I cracking. The mechanical state of the material, considered in the framework of continuum mechanics based on finite element modelling, is described by means of the stress‐based nonlocal damage model which takes into account the stress state and provides realistic local mechanical fields. A semi‐discrete method based on the strong discontinuity approach to estimate crack opening is then considered in the post‐treatment phase. Using a Poiseuille's like relation, the coupling between the mechanical state of the material and its dry gas conductivity is performed. For validation purposes, an original experimental campaign is conducted on a dry concrete disc loaded in a splitting setup. During the loading, gas conductivity and digital image correlation analysis are performed. The comparison with the 3D experimental mechanical global response highlights the performance of the mechanical model. The comparison between crack openings measured by digital image correlation and estimated by the strong discontinuity method shows a good agreement. Finally, the results of the semi‐discrete approach coupled with the gas conductivity compared with experimental data show a good estimation of the structural conductivity. Consequently, if the mechanical problem is well modelled at the global scale, then the proposed approach provides good estimation of gas conductivity. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Computational model coupling mode II discrete fracture propagation with continuum damage zone evolution          下载免费PDF全文

Wencheng Jin  Hao Xu  Chloé Arson  Seth Busetti 《国际地质力学数值与分析法杂志》2017,41(2):223-250

We propose a numerical method that couples a cohesive zone model (CZM) and a finite element‐based continuum damage mechanics (CDM) model. The CZM represents a mode II macro‐fracture, and CDM finite elements (FE) represent the damage zone of the CZM. The coupled CZM/CDM model can capture the flow of energy that takes place between the bulk material that forms the matrix and the macroscopic fracture surfaces. The CDM model, which does not account for micro‐crack interaction, is calibrated against triaxial compression tests performed on Bakken shale, so as to reproduce the stress/strain curve before the failure peak. Based on a comparison with Kachanov's micro‐mechanical model, we confirm that the critical micro‐crack density value equal to 0.3 reflects the point at which crack interaction cannot be neglected. The CZM is assigned a pure mode II cohesive law that accounts for the dependence of the shear strength and energy release rate on confining pressure. The cohesive shear strength of the CZM is calibrated by calculating the shear stress necessary to reach a CDM damage of 0.3 during a direct shear test. We find that the shear cohesive strength of the CZM depends linearly on the confining pressure. Triaxial compression tests are simulated, in which the shale sample is modeled as an FE CDM continuum that contains a predefined thin cohesive zone representing the idealized shear fracture plane. The shear energy release rate of the CZM is fitted in order to match to the post‐peak stress/strain curves obtained during experimental tests performed on Bakken shale. We find that the energy release rate depends linearly on the shear cohesive strength. We then use the calibrated shale rheology to simulate the propagation of a meter‐scale mode II fracture. Under low confining pressure, the macroscopic crack (CZM) and its damaged zone (CDM) propagate simultaneously (i.e., during the same loading increments). Under high confining pressure, the fracture propagates in slip‐friction, that is, the debonding of the cohesive zone alternates with the propagation of continuum damage. The computational method is applicable to a range of geological injection problems including hydraulic fracturing and fluid storage and should be further enhanced by the addition of mode I and mixed mode (I+II+III) propagation. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Anisotropic damage of rock joints during cyclic loading: constitutive framework and numerical integration     

Joshua A. White 《国际地质力学数值与分析法杂志》2014,38(10):1036-1057

This work describes a constitutive framework for modeling the behavior of rough joints under cyclic loading. Particular attention is paid to the intrinsic links between dilatancy, surface degradation, and mobilized shear strength. The framework also accounts for the important effect of shear‐induced anisotropy. The resulting approach is fully three‐dimensional and is not restricted to plane‐displacement kinematics. Both the governing formulation and an algorithm for implicit numerical integration are presented. While the proposed methods are general, we also postulate a specific model that is compared with experimental data. It employs relatively few free parameters but shows good agreement with laboratory tests. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Elastoplastic damage modeling of desaturation and resaturation in argillites     

Y. Jia  H. B. Bian  K. Su  D. Kondo  J. F. Shao 《国际地质力学数值与分析法杂志》2010,34(2):187-220

  相似文献   

An approach to the modeling of viscoelastic damage. Application to the long‐term creep of gypsum rock materials     

B. Nedjar  R. Le Roy 《国际地质力学数值与分析法杂志》2013,37(9):1066-1078

A three‐dimensional phenomenological model is developed to describe the long‐term creep of gypsum rock materials. The approach is based on the framework of continuum damage mechanics where coupling with viscoelasticity is adopted. Specifically, a local damage model based on the concept of yield surface is proposed and deeply investigated. Among the many possibilities, we choose in this work its coupling with a generalized Kelvin–Voigt rheological model to formulate the whole behavior. Long‐term as well as short‐term relaxation processes can be integrated in the model by means of as many as necessary viscoelastic processes. The numerical discretization is described for an easy integration within a finite element procedure. Finally, a set of numerical simulations is given to show the possibilities of the presented model. It shows good agreement with some experimental results found in the literature. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Review and enhancement of 3D concrete models for large‐scale numerical simulations of concrete structures     

B. Valentini  G. Hofstetter 《国际地质力学数值与分析法杂志》2013,37(3):221-246

The present paper focuses on selected plasticity and damage‐plasticity models for describing the 3D material behavior of concrete. In particular, a plasticity model and a damage‐plasticity model are reviewed and evaluated. Based on the results of the evaluation, enhancements are proposed, aiming at improving the correspondence between predicted and observed material behavior and aiming at implementing a robust and efficient stress update algorithm in a finite element program for performing large‐scale 3D numerical simulations of concrete structures. The capabilities of the concrete models are demonstrated by 3D numerical simulations of benchmark tests with combined bending and torsional loading and combined compression and shear loading and by a large‐scale 3D finite element analysis of a model test of a concrete arch dam. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献